PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 87-2015
87-2015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include hole_diameter: 0.203 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, operation_method: LEVER, style_designator: LEVEL, engaging_surface_thickness: 0.050 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-330-6428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87-2015
NSN: 5340-01-330-6428
FSC: 5340
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
hole_diameter0.203 INCHES NOMINAL IN
hole_quantity1
overall_width1.000 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVEL
engaging_surface_thickness0.050 INCHES NOMINAL IN
NSN5340-01-330-6428
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 87-2015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE QUANTITY: 1
•
OPERATION METHOD: LEVER
•
ENGAGING SURFACE THICKNESS: 0.050 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.203 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVEL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE QUANTITY1
OPERATION METHODLEVER
ENGAGING SURFACE THICKNESS0.050 INCHES NOMINAL IN
HOLE DIAMETER0.203 INCHES NOMINAL IN
STYLE DESIGNATORLEVEL
OVERALL WIDTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
A17Upgraded Successor
successor cross-reference
successor
MIL-I-14652Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14652BInterchangeable
interchangeable cross-reference
interchangeable
186943PC382Interchangeable
interchangeable cross-reference
interchangeable
184368PC412Interchangeable
interchangeable cross-reference
interchangeable
169576PC412Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87-2015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87-2015?
87-2015 is a CATCH,CLAMPING.
What parts can replace 87-2015?
There are 17 known substitutes for 87-2015: A17, MIL-I-14652, MIL-DTL-14652B and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87-2015?
87-2015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-330-6428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87-2015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026