PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 87-1301
87-1301 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -67.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 1.500 INCHES NOMINAL IN, connection_style: PLAIN FIRST END, outside_diameter: 2.047 INCHES NOMINAL IN, special_features: PIN LUG EXPANSION LUG TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-974-6699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87-1301
NSN: 4720-00-974-6699
FSC: 4720
CAGE: 51113 — INDEPENDENT LIVING RESOURCES, INC. DBA BRENDAN ASSOCIATES (USA)
SPECIFICATIONS
temp_rating-67.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter1.500 INCHES NOMINAL IN
connection_stylePLAIN FIRST END
outside_diameter2.047 INCHES NOMINAL IN
special_featuresPIN LUG EXPANSION LUG TYPE
thread_directionRIGHT-HAND FIRST END
operating_pressure175.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure1000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.500 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
inside_surface_conditionSMOOTH
NSN4720-00-974-6699
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 87-1301 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH LBS
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER RUBBER IMPREGNATED BRAIDED COPPER WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
THREAD QUANTITY PER INCH: 11-1/2 FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
NOMINAL THREAD SIZE: 1.500 INCHES FIRST END IN
•
CONNECTION STYLE: PLAIN FIRST END
•
OPERATING PRESSURE: 175.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE1000.0 POUNDS PER SQUARE INCH LBS
LAYER COMPOSITION AND LOCATION1ST LAYER RUBBER IMPREGNATED BRAIDED COPPER WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
THREAD QUANTITY PER INCH11-1/2 FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
NOMINAL THREAD SIZE1.500 INCHES FIRST END IN
CONNECTION STYLEPLAIN FIRST END
OPERATING PRESSURE175.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
SPECIAL FEATURESPIN LUG EXPANSION LUG TYPE
THREAD DIRECTIONRIGHT-HAND FIRST END
OUTSIDE DIAMETER2.047 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
SP158Interchangeable
interchangeable cross-reference
interchangeable
E-1644Interchangeable
interchangeable cross-reference
interchangeable
LIS36-3Interchangeable
interchangeable cross-reference
interchangeable
S36-3Interchangeable
interchangeable cross-reference
interchangeable
SP1-5.2Interchangeable
interchangeable cross-reference
interchangeable
SP1-5.8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 87-1301?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87-1301?
87-1301 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 87-1301?
There are 7 known substitutes for 87-1301: SP158, E-1644, LIS36-3 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87-1301?
87-1301 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-974-6699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87-1301

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026