The SPRING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, special_features: MATERIAL: 17-7 PH PER AMS 5673, surface_treatment: CADMIUM AND PASSIVATE, part_name_assigned_by_controlling_agency: SPRING-PILOT. This part is cataloged in the U.S.
Government catalog under NSN 5360-01-027-1936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
86D51-1
NSN:5360-01-027-1936 FSC:5360 — Coil, Flat, Leaf, and Wire Springs CAGE:59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING
special_features
MATERIAL: 17-7 PH PER AMS 5673
surface_treatment
CADMIUM AND PASSIVATE
part_name_assigned_by_controlling_agency
SPRING-PILOT
NSN
5360-01-027-1936
COMPONENT DIAGRAM
KEY FEATURES
•
SPECIAL TEST FEATURES: ENDS CLOSED AND GROUND SQUARE WITHIN 3 DEGREES, BEARING SURFACE OF END COILS: 270 DEGREES MINIMUM; BREAK EDGES 01 INTERNAL DIEAMETER AND OUTSIDE DIAMETER OF END COILS AND ENDS OF WIRE; SPRING MUST WITHSTAND REPEATED COMPRESSION TO 600 WITHOUT TAKING A PERMANENT SET; BAKE AFTER PLATING; DO NOT COMPRESS SPRING TO LESS THAN .6"; CADMIUM PLATE AND PASSIVATE
•
SUPPLEMENTARY FEATURES: WIRE DIAMETER: .085"; NOMINAL OUTSIDE DIAMETER: .510"; MINIMUM INSIDE DIAMETER AT ACTIVE COILS: .325"; MAXIMUM UOTSIDE DIAMETER AT ACTIVE COILS: .530"; MAXIMUM OUTSIDE DIAMETER AT END COILS: .530"; MINIMUM INSIDE DIAMETER AT END COILS: .325"; DIRECTION OF COILS: LEFT HAND OR RIGHT HAND; NUMBER OF ACTIVE COILS: 5; NUMBER OF TOTAL COILS: 7; FREE LENGTH: .884"; LOAD AT .750" 23.54LBS (55,000PSI COMPUTED TOTAL STRESS); LOAD AT .710", 33.15LBS, 76,000PSI (COMPUTED TOTAL STRESS); MAXIMUM SOLID HEIGHT: .595" (COMPUTED LOAD: 55LBS, 125,000PSI COMPUTED TOTAL STRESS); THEO SOLID HEIGHT: .510" (71LBS COMPUTED LOAD, 170,000PSI COMPUTED TOTAL STRESS) LBS
•
SURFACE TREATMENT: CADMIUM AND PASSIVATE
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
SPECIAL TEST FEATURES
ENDS CLOSED AND GROUND SQUARE WITHIN 3 DEGREES, BEARING SURFACE OF END COILS: 270 DEGREES MINIMUM; BREAK EDGES 01 INTERNAL DIEAMETER AND OUTSIDE DIAMETER OF END COILS AND ENDS OF WIRE; SPRING MUST WITHSTAND REPEATED COMPRESSION TO 600 WITHOUT TAKING A PERMANENT SET; BAKE AFTER PLATING; DO NOT COMPRESS SPRING TO LESS THAN .6"; CADMIUM PLATE AND PASSIVATE
SUPPLEMENTARY FEATURES
WIRE DIAMETER: .085"; NOMINAL OUTSIDE DIAMETER: .510"; MINIMUM INSIDE DIAMETER AT ACTIVE COILS: .325"; MAXIMUM UOTSIDE DIAMETER AT ACTIVE COILS: .530"; MAXIMUM OUTSIDE DIAMETER AT END COILS: .530"; MINIMUM INSIDE DIAMETER AT END COILS: .325"; DIRECTION OF COILS: LEFT HAND OR RIGHT HAND; NUMBER OF ACTIVE COILS: 5; NUMBER OF TOTAL COILS: 7; FREE LENGTH: .884"; LOAD AT .750" 23.54LBS (55,000PSI COMPUTED TOTAL STRESS); LOAD AT .710", 33.15LBS, 76,000PSI (COMPUTED TOTAL STRESS); MAXIMUM SOLID HEIGHT: .595" (COMPUTED LOAD: 55LBS, 125,000PSI COMPUTED TOTAL STRESS); THEO SOLID HEIGHT: .510" (71LBS COMPUTED LOAD, 170,000PSI COMPUTED TOTAL STRESS) LBS
SPECIAL FEATURES
MATERIAL: 17-7 PH PER AMS 5673
SURFACE TREATMENT
CADMIUM AND PASSIVATE
PART NAME ASSIGNED BY CONTROLLING AGENCY
SPRING-PILOT
MATERIAL
STEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5360 — Coil, Flat, Leaf, and Wire Springs
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86D51-1?
86D51-1 is a SPRING.
What is the NSN for 86D51-1?
86D51-1 is cataloged in the U.S. Government catalog under NSN 5360-01-027-1936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.