PartsTable
Technical Data Sheet
Download PDF

8698700 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8698700: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR AND CORK OVERALL, hole_diameter: 0.360 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.380 INCHES NOMINAL IN, outside_diameter: 5.380 INCHES NOMINAL IN, aperture_diameter: 3.530 INCHES NOMINAL IN, bolt_circle_diameter: 4.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-141-5095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8698700
NSN: 5330-00-141-5095
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
hole_diameter0.360 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.380 INCHES NOMINAL IN
outside_diameter5.380 INCHES NOMINAL IN
aperture_diameter3.530 INCHES NOMINAL IN
bolt_circle_diameter4.750 INCHES NOMINAL IN
outside_corner_radius0.380 INCHES NOMINAL IN
cross-sectional_thickness0.013 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
inside_corner_inverted_radius0.500 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803,+2255A MIL SPEC ALL MATERIAL RESPONSES OVERALL A
NSN5330-00-141-5095
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8698700 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.013 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
INSIDE CORNER INVERTED RADIUS: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+2255A MIL SPEC ALL MATERIAL RESPONSES OVERALL A
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 5.380 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.530 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 4.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.013 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
INSIDE CORNER INVERTED RADIUS0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+2255A MIL SPEC ALL MATERIAL RESPONSES OVERALL A
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH5.380 INCHES NOMINAL IN
OUTSIDE DIAMETER5.380 INCHES NOMINAL IN
APERTURE DIAMETER3.530 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.750 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.380 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8698700?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8698700?
8698700 is a GASKET.
What is the NSN for 8698700?
8698700 is cataloged in the U.S. Government catalog under NSN 5330-00-141-5095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8698700

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.