PartsTable
Technical Data Sheet
Download PDF

8694511 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8694511: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, material: STEEL COMP 416 OVERALL, overall_length: 1.531 INCHES NOMINAL IN, undercut_width: 0.109 INCHES NOMINAL IN, first_end_style: CHAMFERED, effective_length: 1.234 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-285-2725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8694511
NSN: 5315-00-285-2725
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
materialSTEEL COMP 416 OVERALL
overall_length1.531 INCHES NOMINAL IN
undercut_width0.109 INCHES NOMINAL IN
first_end_styleCHAMFERED
effective_length1.234 INCHES NOMINAL IN
style_designatorGROOVE
undercut_diameter0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationASTM A-582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-285-2725
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8694511 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.109 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A-582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.109 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A-582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
OVERALL LENGTH1.531 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8694511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8694511?
8694511 is a PIN,GROOVED,HEADLESS.
What is the NSN for 8694511?
8694511 is cataloged in the U.S. Government catalog under NSN 5315-00-285-2725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8694511

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.