PartsTable
Technical Data Sheet
Download PDF

8682564 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8682564: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include aperture_width: 4.500 INCHES NOMINAL IN, aperture_length: 5.320 INCHES NOMINAL IN, style_designator: MARINE SQUARE, bearing_surface_width: 0.380 INCHES NOMINAL IN, end_item_identification: 2350-00-116-9765 TANK COMBAT RISE, cross-sectional_thickness: 0.0260 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-679-8054, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8682564
NSN: 5330-00-679-8054
FSC: 5330 — Packing and Gasket Materials
CAGE: 79788 — EAGLE-PICHER INDUSTRIES INC WOLVERINE GASKET DIV (USA)
SPECIFICATIONS
aperture_width4.500 INCHES NOMINAL IN
aperture_length5.320 INCHES NOMINAL IN
special_featuresMATERIAL(1)INNER PLATE0.006TO0.008 BLACK PLATE,(2)OUTER PLATES 0.015IN.THICK EQUALS FELCOPLY L2201-2; SEAL PRINTOSEAL P05-707-3R;REFER DWG CAGE 19207 PN 8682564. IN
style_designatorMARINE SQUARE
bolt_hole_quantity6
bearing_surface_width0.380 INCHES NOMINAL IN
end_item_identification2350-00-116-9765 TANK COMBAT RISE
cross-sectional_thickness0.0260 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN
largest_bolt_hole_diameter0.340 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
NSN5330-00-679-8054
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8682564 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.0260 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: MARINE SQUARE
•
BEARING SURFACE WIDTH: 0.380 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
APERTURE WIDTH: 4.500 INCHES NOMINAL IN
•
APERTURE LENGTH: 5.320 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.0260 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN
STYLE DESIGNATORMARINE SQUARE
BEARING SURFACE WIDTH0.380 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
APERTURE WIDTH4.500 INCHES NOMINAL IN
APERTURE LENGTH5.320 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
SPECIAL FEATURESMATERIAL(1)INNER PLATE0.006TO0.008 BLACK PLATE,(2)OUTER PLATES 0.015IN.THICK EQUALS FELCOPLY L2201-2; SEAL PRINTOSEAL P05-707-3R;REFER DWG CAGE 19207 PN 8682564. IN
LARGEST BOLT HOLE DIAMETER0.340 INCHES NOMINAL IN
END ITEM IDENTIFICATION2350-00-116-9765 TANK COMBAT RISE
SUBSTITUTES & CROSS-REFERENCES 2
583486Reference document
Same NSN cross-reference
Reference document — Secondary reference
5330006798054Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8682564?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8682564?
8682564 is a GASKET.
What parts can replace 8682564?
There are 2 known substitutes for 8682564: 583486, 5330006798054. Substitute compatibility should be verified for your specific system.
What is the NSN for 8682564?
8682564 is cataloged in the U.S. Government catalog under NSN 5330-00-679-8054. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8682564