PartsTable
Technical Data Sheet
Download PDF

8679991 — SHAFT AND BUSHING ASSEMBLY

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

8679991: SHAFT AND BUSHING ASSEMBLY.

The SHAFT AND BUSHING ASSEMBLY is a the manufacturer industrial component. Key specifications include end_item_identification: 2320-01-123-6827, general_characteristics_item_description: 1.408 IN. MIN 1.409 IN.

MAX DIA IN. This part is cataloged in the U.S. Government catalog under NSN 5360-00-561-9744, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8679991
NSN: 5360-00-561-9744
NIINs: 005619744, 011681983
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
end_item_identification2320-01-123-6827
general_characteristics_item_description1.408 IN. MIN 1.409 IN. MAX DIA IN
NSN5360-00-561-9744
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SHAFT AND BUSHING ASSEMBLY TITLE COMPONENT PN 8679991 MFR SHAFT AND BUSHING ASSE
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 0.755 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
•
END STYLE: MACHINED HALF LOOP BOTH ENDS
•
DESIGN TYPE: CLOSED
•
STYLE DESIGNATOR: CYLINDRICAL
•
OPENING WIDTH: 0.180 INCHES NOMINAL BOTH ENDS IN
•
SPRING FREE LENGTH: 2.380 INCHES NOMINAL IN
•
SPRING DEFLECTION RATE: 142.000 POUNDS PER INCH MINIMUM AND 146.000 POUNDS PER INCH MAXIMUM LBS
•
INSIDE DIAMETER: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER0.755 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
END STYLEMACHINED HALF LOOP BOTH ENDS
DESIGN TYPECLOSED
STYLE DESIGNATORCYLINDRICAL
OPENING WIDTH0.180 INCHES NOMINAL BOTH ENDS IN
SPRING FREE LENGTH2.380 INCHES NOMINAL IN
SPRING DEFLECTION RATE142.000 POUNDS PER INCH MINIMUM AND 146.000 POUNDS PER INCH MAXIMUM LBS
INSIDE DIAMETER0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
COIL HELIX DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
GAAN150850-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8679991?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8679991?
8679991 is a SHAFT AND BUSHING ASSEMBLY.
What parts can replace 8679991?
There is 1 known substitute for 8679991: GAAN150850-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 8679991?
8679991 is cataloged in the U.S. Government catalog under NSN 5360-00-561-9744. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8679991

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.