8673D — 8673D

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

8673D: 8673D.

The 8673D is a the manufacturer industrial component. Key specifications include overall_width: 16.800 INCHES NOMINAL IN, overall_height: 9.200 INCHES NOMINAL IN, overall_length: 24.100 INCHES NOMINAL IN, voltage_rating: 100.0 VOLTS MINIMUM AND 500.0 VOLTS MAXIMUM, frequency_range_rating: +0.050 TO 26.000 GIGAHERTZ, end_item_identification: 4920-01-186-2430. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-064-7188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 8673D

NSN: 5930-00-064-7188
NIINs: 000647188, 012593950
FSC: 5930 — Switches
CAGE: 82121 — ELECTRO SWITCH CORP. DBA ELECTRO SWITCH CORP (USA)

SPECIFICATIONS

overall_width	16.800 INCHES NOMINAL IN
overall_height	9.200 INCHES NOMINAL IN
overall_length	24.100 INCHES NOMINAL IN
voltage_rating	100.0 VOLTS MINIMUM AND 500.0 VOLTS MAXIMUM
special_features	MANUAL,AUTO OR SINGLE SWEEP MODES; SWEEP OUTPUTS 0 TO 10 V RAMP START TO STOP; REMOTE PROGRAMMING; TEMP RANGE 0 DEG C TO P55 DEG C; AM/FM V
frequency_range_rating	+0.050 TO 26.000 GIGAHERTZ
end_item_identification	4920-01-186-2430
frequency_band_quantity	5
NSN	5930-00-064-7188

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: RECTANGULAR/SQUARE, THREADED HOLE SINGLE ACTUATOR

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

TERMINAL TYPE: TAB W/SCREW

•

MOUNTING FACILITY PATTERN: FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY

•

CONTACT LOAD CURRENT RATING: 10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL

•

MOUNTING METHOD: BRACKET(S) AND THREADED HOLE(S) SINGLE MOUNTING FACILITY

TECHNICAL CHARACTERISTICS

SHAFT TYPE	RECTANGULAR/SQUARE, THREADED HOLE SINGLE ACTUATOR
OVERALL HEIGHT	2.812 INCHES NOMINAL IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
TERMINAL TYPE	TAB W/SCREW
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY
CONTACT LOAD CURRENT RATING	10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	5.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
MOUNTING METHOD	BRACKET(S) AND THREADED HOLE(S) SINGLE MOUNTING FACILITY
POLE QUANTITY	2 EACH SECTION FRONT
STYLE DESIGNATOR	TAP, CIRCUIT SELECTOR

SUBSTITUTES & CROSS-REFERENCES 9

N14558Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

23203GReference document

Same NSN cross-reference

Reference document — Secondary reference

1005671 PIECE 8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

S2JR3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-S-21604Reference document

Same NSN cross-reference

Reference document — Secondary reference

1800874Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 8673D?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8673D?

8673D is a 8673D. It is classified as a MRO (MRO_GENERAL).

What parts can replace 8673D?

There are 9 known substitutes for 8673D: N14558, 23203G, 1005671 PIECE 8 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 8673D?

8673D is cataloged in the U.S. Government catalog under NSN 5930-00-064-7188. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

8673D — 8673D

Request a Quote — 8673D