PartsTable
Technical Data Sheet
Download PDF

867047-0008 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

867047-0008: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK REVERSE KEYED, key_length: 0.104 INCHES MAXIMUM IN, nut_length: 0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN, head_height: 0.104 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-010-9773, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
867047-0008
NSN: 5310-01-010-9773
FSC: 5310 — Nuts and Washers
CAGE: 13973 — LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 430 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK REVERSE KEYED
key_length0.104 INCHES MAXIMUM IN
nut_length0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
head_height0.104 INCHES MAXIMUM IN
nut_diameter0.409 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN
thread_class3B
head_diameter0.656 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeOPEN
thread_directionRIGHT-HAND
NSN5310-01-010-9773
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 867047-0008 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.104 INCHES MAXIMUM IN
•
NUT LENGTH: 0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HEAD COUNTERSINK ANGLE: 100.00 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT COUNTERSUNK REVERSE KEYED
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.104 INCHES MAXIMUM IN
NUT LENGTH0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HEAD COUNTERSINK ANGLE100.00 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK END TYPEOPEN
HEAD STYLEFLAT COUNTERSUNK REVERSE KEYED
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT DIAMETER0.409 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
SS31K256Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS27130CR140KReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 867047-0008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 867047-0008?
867047-0008 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 867047-0008?
There are 2 known substitutes for 867047-0008: SS31K256, MS27130CR140K. Substitute compatibility should be verified for your specific system.
What is the NSN for 867047-0008?
867047-0008 is cataloged in the U.S. Government catalog under NSN 5310-01-010-9773. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 867047-0008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.