PartsTable
Technical Data Sheet
Download PDF

8668783 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8668783: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 2.031 INCHES MINIMUM AND 2.093 INCHES MAXIMUM IN, material: STEEL, overall_height: 1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM IN, stock_diameter: 0.054 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN, style_designator: PIN, casehardening_indicator: NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-300-5343, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8668783
NSN: 5340-00-300-5343
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width2.031 INCHES MINIMUM AND 2.093 INCHES MAXIMUM IN
materialSTEEL
overall_height1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM IN
stock_diameter0.054 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN
style_designatorPIN
casehardening_indicatorNOT CASEHARDENED
material_hardness_rating40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
NSN5340-00-300-5343
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8668783 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: PIN
•
STOCK DIAMETER: 0.054 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 2.031 INCHES MINIMUM AND 2.093 INCHES MAXIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.843 INCHES MINIMUM AND 1.906 INCHES MAXIMUM IN
MATERIAL HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORPIN
STOCK DIAMETER0.054 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
WIDTH2.031 INCHES MINIMUM AND 2.093 INCHES MAXIMUM IN
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8668783?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8668783?
8668783 is a CLIP,RETAINING.
What is the NSN for 8668783?
8668783 is cataloged in the U.S. Government catalog under NSN 5340-00-300-5343. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8668783