PartsTable
Technical Data Sheet
Download PDF

86625042 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

86625042: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 1.000 INCHES NOMINAL IN, thread_class: 2B SHANK, overall_width: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN, shank_diameter: 0.312 INCHES NOMINAL IN, fork_span_width: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-546-2570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86625042
NSN: 5340-01-546-2570
FSC: 5340 — Hardware, Commercial
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth1.000 INCHES NOMINAL IN
thread_class2B SHANK
overall_width0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
shank_diameter0.312 INCHES NOMINAL IN
fork_span_width0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND SHANK
nominal_thread_size0.190 INCHES SHANK IN
end_item_identification2420-01-532-3399
thread_quantity_per_inch32 SHANK
thread_series_designatorUN SHANK
NSN5340-01-546-2570
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 86625042 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.312 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD DIRECTION: RIGHT-HAND SHANK
•
NOMINAL THREAD SIZE: 0.190 INCHES SHANK IN
•
THREAD CLASS: 2B SHANK
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.312 INCHES NOMINAL IN
FORK SPAN WIDTH0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND SHANK
NOMINAL THREAD SIZE0.190 INCHES SHANK IN
THREAD CLASS2B SHANK
END ITEM IDENTIFICATION2420-01-532-3399
THREAD QUANTITY PER INCH32 SHANK
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
213-123Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 86625042?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86625042?
86625042 is a CLEVIS,ROD END.
What parts can replace 86625042?
There is 1 known substitute for 86625042: 213-123. Substitute compatibility should be verified for your specific system.
What is the NSN for 86625042?
86625042 is cataloged in the U.S. Government catalog under NSN 5340-01-546-2570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86625042