PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86397C
86397C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND STEEL OVERALL, outside_diameter: 6.250 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 5.625 INCHES NOMINAL IN, cross-sectional_thickness: 0.312 INCHES NOMINAL IN, cross-sectional_shape_style: METAL AND NONMETALLIC MATERIALS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-4957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86397C
NSN: 5330-00-599-4957
FSC: 5330
CAGE: 93236 — DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE (USA)
SPECIFICATIONS
materialASBESTOS AND STEEL OVERALL
outside_diameter6.250 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter5.625 INCHES NOMINAL IN
cross-sectional_thickness0.312 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND NONMETALLIC MATERIALS
NSN5330-00-599-4957
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 86397C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.312 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND NONMETALLIC MATERIALS
•
MATERIAL: ASBESTOS AND STEEL OVERALL
•
APERTURE DIAMETER: 5.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.312 INCHES NOMINAL IN
OUTSIDE DIAMETER6.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND NONMETALLIC MATERIALS
MATERIALASBESTOS AND STEEL OVERALL
APERTURE DIAMETER5.625 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
101 334 167Interchangeable
interchangeable cross-reference
interchangeable
S-89BInterchangeable
interchangeable cross-reference
interchangeable
SE-89BInterchangeable
interchangeable cross-reference
interchangeable
2500253Interchangeable
interchangeable cross-reference
interchangeable
1230506Interchangeable
interchangeable cross-reference
interchangeable
89BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86397C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86397C?
86397C is a GASKET.
What parts can replace 86397C?
There are 7 known substitutes for 86397C: 101 334 167, S-89B, SE-89B and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 86397C?
86397C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-4957. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86397C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026