PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86374M1
86374M1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, outside_diameter: 8.632 INCHES NOMINAL IN, housing_bore_diameter: 8.625 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-8911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86374M1
NSN: 5330-00-904-8911
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
outside_diameter8.632 INCHES NOMINAL IN
housing_bore_diameter8.625 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter7.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-904-8911
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 86374M1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 8.625 INCHES NOMINAL IN
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 8.632 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER8.625 INCHES NOMINAL IN
SEAL WIDTH0.750 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER8.632 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER7.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
71245Interchangeable
interchangeable cross-reference
interchangeable
WT71245WInterchangeable
interchangeable cross-reference
interchangeable
10513496Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
18F682D47Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86374M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86374M1?
86374M1 is a SEAL,PLAIN ENCASED.
What parts can replace 86374M1?
There are 5 known substitutes for 86374M1: 71245, WT71245W, 10513496 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 86374M1?
86374M1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-8911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86374M1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026