PartsTable
Technical Data Sheet
Download PDF

8630-36-5C1 — BOLT,EYE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

8630-36-5C1: BOLT,EYE.

The BOLT,EYE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, shank_length: 6.750 INCHES NOMINAL IN, thread_length: 5.000 INCHES MINIMUM IN, overall_length: 8.750 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, eye_outside_width: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-353-4826, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8630-36-5C1
NSN: 5306-00-353-4826
FSC: 5306 — Bolts
CAGE: 98042 — MARINETTE MARINE CORPORATION DBA MARINETTE MARINE CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
shank_length6.750 INCHES NOMINAL IN
thread_length5.000 INCHES MINIMUM IN
overall_length8.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
eye_outside_width1.250 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
eye_inside_diameter0.886 INCHES NOMINAL IN
eye_stock_thickness1.219 INCHES NOMINAL IN
nominal_thread_diameter0.875 INCHES IN
thread_quantity_per_inch8
thread_series_designatorACME
NSN5306-00-353-4826
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8630-36-5C1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 5.000 INCHES MINIMUM IN
•
SHANK LENGTH: 6.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.875 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
EYE INSIDE DIAMETER: 0.886 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD LENGTH5.000 INCHES MINIMUM IN
SHANK LENGTH6.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH8.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.875 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
EYE INSIDE DIAMETER0.886 INCHES NOMINAL IN
EYE STOCK THICKNESS1.219 INCHES NOMINAL IN
THREAD QUANTITY PER INCH8
SUBSTITUTES & CROSS-REFERENCES 1
8630-36-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8630-36-5C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8630-36-5C1?
8630-36-5C1 is a BOLT,EYE.
What parts can replace 8630-36-5C1?
There is 1 known substitute for 8630-36-5C1: 8630-36-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 8630-36-5C1?
8630-36-5C1 is cataloged in the U.S. Government catalog under NSN 5306-00-353-4826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8630-36-5C1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.