PartsTable
Technical Data Sheet
Download PDF

863-110895 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

863-110895: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_shape: ROUND, overall_width: 0.750 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, fork_span_width: 0.380 INCHES NOMINAL IN, special_features: TM 9-3510-122-24P. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-481-1682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
863-110895
NSN: 5340-01-481-1682
FSC: 5340 — Hardware, Commercial
CAGE: 4X630 — GUILD ASSOCIATES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_shapeROUND
overall_width0.750 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
fork_span_width0.380 INCHES NOMINAL IN
special_featuresTM 9-3510-122-24P
style_designatorCLEVIS
surface_treatmentZINC OVERALL
fork_arm_thickness0.550 INCHES NOMINAL IN
end_item_identification2330-00-122-6779,CLS MODEL M871;22.5 TON SEMI-TRAILER LOW,BED
distance_from_pivot_pinhole_center_to_rod_connection_end1.300 INCHES NOMINAL IN
NSN5340-01-481-1682
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 863-110895 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.380 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.550 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
HOLE SHAPE: ROUND
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.380 INCHES NOMINAL IN
FORK ARM THICKNESS0.550 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.750 INCHES NOMINAL IN
HOLE SHAPEROUND
SPECIAL FEATURESTM 9-3510-122-24P
SURFACE TREATMENTZINC OVERALL
END ITEM IDENTIFICATION2330-00-122-6779,CLS MODEL M871;22.5 TON SEMI-TRAILER LOW,BED
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
CT-15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 863-110895?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 863-110895?
863-110895 is a CLEVIS,ROD END.
What parts can replace 863-110895?
There is 1 known substitute for 863-110895: CT-15. Substitute compatibility should be verified for your specific system.
What is the NSN for 863-110895?
863-110895 is cataloged in the U.S. Government catalog under NSN 5340-01-481-1682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 863-110895

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.