PartsTable
Technical Data Sheet
Download PDF

8623174 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8623174: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, hole_diameter: 0.325 INCHES MINIMUM AND 0.360 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, special_features: FOUR BOLT HOLES 0.360 IN. DIA IN, aperture_diameter: 3.800 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-150-5928, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8623174
NSN: 5330-01-150-5928
FSC: 5330 — Packing and Gasket Materials
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
hole_diameter0.325 INCHES MINIMUM AND 0.360 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
special_featuresFOUR BOLT HOLES 0.360 IN. DIA IN
aperture_diameter3.800 INCHES NOMINAL IN
bolt_hole_quantity2
NSN5330-01-150-5928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8623174 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 3.800 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
MATERIAL: STEEL COMP 1010 OVERALL
•
HOLE DIAMETER: 0.325 INCHES MINIMUM AND 0.360 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
APERTURE DIAMETER3.800 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
SPECIAL FEATURESFOUR BOLT HOLES 0.360 IN. DIA IN
MATERIALSTEEL COMP 1010 OVERALL
HOLE DIAMETER0.325 INCHES MINIMUM AND 0.360 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8623174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8623174?
8623174 is a GASKET.
What is the NSN for 8623174?
8623174 is cataloged in the U.S. Government catalog under NSN 5330-01-150-5928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8623174