PartsTable
Technical Data Sheet
Download PDF

8616059 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8616059: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.126 INCHES NOMINAL IN, diameter: 0.624 INCHES NOMINAL IN, material: STEEL COMP 416SE OVERALL, head_style: FLAT, chamfer_length: 0.031 INCHES NOMINAL IN, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-351-2937, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8616059
NSN: 5315-00-351-2937
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
height0.126 INCHES NOMINAL IN
diameter0.624 INCHES NOMINAL IN
materialSTEEL COMP 416SE OVERALL
head_styleFLAT
chamfer_length0.031 INCHES NOMINAL IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
special_featuresITEM CONTAINS 3 HOLES NO.7,.201 DRILL
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter1.500 INCHES NOMINAL IN
under_head_length1.062 INCHES NOMINAL IN
NSN5315-00-351-2937
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8616059 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.062 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 1.500 INCHES NOMINAL IN
•
DIAMETER: 0.624 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.031 INCHES NOMINAL IN
UNDER HEAD LENGTH1.062 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER1.500 INCHES NOMINAL IN
DIAMETER0.624 INCHES NOMINAL IN
HEAD STYLEFLAT
HEIGHT0.126 INCHES NOMINAL IN
SPECIAL FEATURESITEM CONTAINS 3 HOLES NO.7,.201 DRILL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315003512937Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 8616059?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8616059?
8616059 is a PIN,STRAIGHT,HEADED.
What parts can replace 8616059?
There is 1 known substitute for 8616059: 5315003512937. Substitute compatibility should be verified for your specific system.
What is the NSN for 8616059?
8616059 is cataloged in the U.S. Government catalog under NSN 5315-00-351-2937. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8616059