PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86114
86114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSORTMENT,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYVINYL OVERALL, tip_type: OPEN END, inflation_device: PILOT BALLOON, nominal_diameter: 8.500 MILLIMETERS MM, special_features: 10 PER BOX, style_designator: TRACHEAL W/ CUFF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-184-2769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86114
NSN: 5330-00-184-2769
FSC: 5330
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL OVERALL
tip_typeOPEN END
inflation_devicePILOT BALLOON
nominal_diameter8.500 MILLIMETERS MM
special_features10 PER BOX
style_designatorTRACHEAL W/ CUFF
design_designationTRACHEAL
core_fabrication_methodNOT WOVEN
patient_size_designationADULT
part_name_assigned_by_controlling_agencyTUBE TRACHEALE12 WITH CUFF ADULT SZ 8.50MM DIA PLAS NONSTER 10S MM
NSN5330-00-184-2769
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 86114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT SOURCE: 23926
•
DOCUMENT TYPE: INDUSTRIAL DRAWING
•
DOCUMENT IDENTIFICATION: DAH86114
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT SOURCE23926
DOCUMENT TYPEINDUSTRIAL DRAWING
DOCUMENT IDENTIFICATIONDAH86114
COMPONENT DOCUMENT ORIGININDUSTRIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
109-85Interchangeable
interchangeable cross-reference
interchangeable
43159-085Interchangeable
interchangeable cross-reference
interchangeable
86114Interchangeable
interchangeable cross-reference
interchangeable
AH86114Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86114?
86114 is a PACKING ASSORTMENT,PREFORMED.
What parts can replace 86114?
There are 4 known substitutes for 86114: 109-85, 43159-085, 86114 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 86114?
86114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-184-2769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026