PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8607001
8607001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,MOUNTING,CONN is a the manufacturer industrial component. Key specifications include functional_description: CONTROLLER DISPLAY, end_item_identification: RVR NEW GENERATION (RVRNG), reference_data_and_literature: 3, TI-6560.17, FA 10268, RUNWAY VISUAL RANGE SYSTEM ON-SITE REQUIREMENTS, SEC 1-11, PG 8-7. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-3543, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8607001
NSN: 5340-00-291-3543
FSC: 5340
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
functional_descriptionCONTROLLER DISPLAY
end_item_identificationRVR NEW GENERATION (RVRNG)
reference_data_and_literature3, TI-6560.17, FA 10268, RUNWAY VISUAL RANGE SYSTEM ON-SITE REQUIREMENTS, SEC 1-11, PG 8-7
NSN5340-00-291-3543
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8607001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END CONNECTION STYLE: ROUND EYE
•
INSIDE WIDTH: 0.750 INCHES NOMINAL IN
•
DESIGN TYPE: FIXED
•
END POSITION: HOOKS IN SAME PLANE
•
MATERIAL: STEEL CONNECTION END
•
UNATTACHED RING: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
END CONNECTION STYLEROUND EYE
INSIDE WIDTH0.750 INCHES NOMINAL IN
DESIGN TYPEFIXED
END POSITIONHOOKS IN SAME PLANE
OVERALL LENGTH5.000 INCHES NOMINAL IN
MATERIALSTEEL CONNECTION END
MATERIALSTEEL HOOK
UNATTACHED RINGNOT INCLUDED
HOOK STYLE DESIGNATORPIVOT
RUBBER COVERED FEATURENOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2991Upgraded Successor
successor cross-reference
successor
V2991Upgraded Successor
successor cross-reference
successor
3100-2991Upgraded Successor
successor cross-reference
successor
3047Upgraded Successor
successor cross-reference
successor
3387Interchangeable
interchangeable cross-reference
interchangeable
D3387Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8607001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8607001?
8607001 is a PLATE,MOUNTING,CONN.
What parts can replace 8607001?
There are 14 known substitutes for 8607001: 2991, V2991, 3100-2991 and 11 more. Substitute compatibility should be verified for your specific system.
Is 8607001 still available?
8607001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8607001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026