PartsTable
Technical Data Sheet
Download PDF

8601164-2 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8601164-2: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include shape: SQUARE, material: UNABLE TO DECODE, thickness: 0.250 INCHES NOMINAL IN, special_features: NHA 8601153,USED ON DL 8601150, mounting_hole_type: THRU HOLE, mounting_hole_diameter: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-695-6387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8601164-2
NSN: 5340-01-695-6387
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeSQUARE
materialUNABLE TO DECODE
thickness0.250 INCHES NOMINAL IN
special_featuresNHA 8601153,USED ON DL 8601150
mounting_hole_typeTHRU HOLE
mounting_hole_diameter1.250 INCHES NOMINAL IN
mounting_hole_quantity8
end_item_identificationALMDS CONTAIN
material_document_and_classificationA-A-59588,CLASS 2B,GRADE 50 ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
part_name_assigned_by_controlling_agencyPAD,SILICONE
NSN5340-01-695-6387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8601164-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 8
•
MATERIAL DOCUMENT AND CLASSIFICATION: A-A-59588,CLASS 2B,GRADE 50 ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
MOUNTING HOLE DIAMETER: 1.250 INCHES NOMINAL IN
•
SHAPE: SQUARE
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY8
MATERIAL DOCUMENT AND CLASSIFICATIONA-A-59588,CLASS 2B,GRADE 50 ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
MOUNTING HOLE DIAMETER1.250 INCHES NOMINAL IN
SHAPESQUARE
SPECIAL FEATURESNHA 8601153,USED ON DL 8601150
PART NAME ASSIGNED BY CONTROLLING AGENCYPAD,SILICONE
END ITEM IDENTIFICATIONALMDS CONTAIN
MATERIALUNABLE TO DECODE
THICKNESS0.250 INCHES NOMINAL IN
MOUNTING HOLE TYPETHRU HOLE
SUBSTITUTES & CROSS-REFERENCES 1
8601164Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8601164-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8601164-2?
8601164-2 is a PAD,CUSHIONING.
What parts can replace 8601164-2?
There is 1 known substitute for 8601164-2: 8601164. Substitute compatibility should be verified for your specific system.
What is the NSN for 8601164-2?
8601164-2 is cataloged in the U.S. Government catalog under NSN 5340-01-695-6387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8601164-2