PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86-246
86-246 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The fitness tracker is always with you - during sport, at work and at play. With the changeable wrist strap for the Fitbit smartwatch, you can make your fitness watch an accessory: stylish for work, breathable for sport and colourful for happy times. Health, fitness and style in one! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-7580, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86-246
NSN: 5330-01-208-7580
FSC: 5330
CAGE: 60703 — TRICO PRODUCTS CORPORATION (USA)
SPECIFICATIONS
materialIRON BODY
overall_height1.312 INCHES NOMINAL IN
overall_length4.125 INCHES NOMINAL IN
connection_typeTHREADED INTERNAL PIPE FIRST FLUID END CONNECTION
connection_stylePLAIN ALL ENDS
style_designatorMALE COUPLING HALF
surface_treatmentZINC BODY
bolt_hole_quantity4
nominal_thread_size1.000 INCHES ALL ENDS IN
quick_disconnect_methodTWO LUG UNIVERSAL ALL ENDS
thread_series_designatorNPT ALL ENDS
cross-sectional_thickness0.062 INCHES NOMINAL IN
NSN5330-01-208-7580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 86-246 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OVERALL
•
SMALLEST BOLT HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
LARGEST BOLT HOLE DIAMETER: 0.578 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT1.312 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
SMALLEST BOLT HOLE DIAMETER0.219 INCHES NOMINAL IN
LARGEST BOLT HOLE DIAMETER0.578 INCHES NOMINAL IN
OVERALL LENGTH4.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY4
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
AM-13Interchangeable
interchangeable cross-reference
interchangeable
MILC11893TYPE2Interchangeable
interchangeable cross-reference
interchangeable
WWC633TYPE2Interchangeable
interchangeable cross-reference
interchangeable
436439-C1Interchangeable
Same NIIN cross-reference
interchangeable
J86246Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86-246?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86-246?
86-246 is a COUPLING HALF,QUICK DISCONNECT manufactured by Hama.
What parts can replace 86-246?
There are 5 known substitutes for 86-246: AM-13, MILC11893TYPE2, WWC633TYPE2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 86-246?
86-246 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-7580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86-246

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026