PartsTable
Technical Data Sheet
Download PDF

86-22-TRDN — CASTER,SWIVEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

86-22-TRDN: CASTER,SWIVEL.

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: STEEL WHEEL RIM, wheel_type: BUILT UP, plate_style: RECTANGULAR, tread_width: 1.562 INCHES NOMINAL IN, wheel_diameter: 6.000 INCHES NOMINAL IN, effective_height: 7.630 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-823-5165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86-22-TRDN
NSN: 5340-00-823-5165
FSC: 5340 — Hardware, Commercial
CAGE: 71823 — DARNELL CORPORATION (USA)
SPECIFICATIONS
materialSTEEL WHEEL RIM
wheel_typeBUILT UP
plate_styleRECTANGULAR
tread_width1.562 INCHES NOMINAL IN
wheel_diameter6.000 INCHES NOMINAL IN
wheel_quantity1
effective_height7.630 INCHES MAXIMUM IN
style_designatorSWIVEL OFFSET
caster_plate_width3.812 INCHES NOMINAL IN
wheel_bearing_typeBALL
caster_plate_length6.250 INCHES NOMINAL IN
swivel_bearing_typeBALL
NSN5340-00-823-5165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 86-22-TRDN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE STYLE: RECTANGULAR
•
TREAD WIDTH: 1.562 INCHES NOMINAL IN
•
WHEEL TYPE: BUILT UP
•
STYLE DESIGNATOR: SWIVEL OFFSET
•
CASTER PLATE MOUNTING HOLE DIAMETER: 0.397 INCHES NOMINAL IN
•
CASTER PLATE WIDTH: 3.812 INCHES NOMINAL IN
•
CASTER PLATE LENGTH: 6.250 INCHES NOMINAL IN
•
WHEEL QUANTITY: 1
TECHNICAL CHARACTERISTICS
PLATE STYLERECTANGULAR
TREAD WIDTH1.562 INCHES NOMINAL IN
WHEEL TYPEBUILT UP
STYLE DESIGNATORSWIVEL OFFSET
CASTER PLATE MOUNTING HOLE DIAMETER0.397 INCHES NOMINAL IN
CASTER PLATE WIDTH3.812 INCHES NOMINAL IN
CASTER PLATE LENGTH6.250 INCHES NOMINAL IN
WHEEL QUANTITY1
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL AND TREAD REQUIREMENTS
NONDEFINITIVE SPEC/STD DATA1 TYPE AND C CLASS AND 3 SIZE
SUBSTITUTES & CROSS-REFERENCES 3
1659614Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
22-86BRDNReference document
Same NSN cross-reference
Reference document — Secondary reference
FFC88Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 86-22-TRDN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86-22-TRDN?
86-22-TRDN is a CASTER,SWIVEL.
What parts can replace 86-22-TRDN?
There are 3 known substitutes for 86-22-TRDN: 1659614, 22-86BRDN, FFC88. Substitute compatibility should be verified for your specific system.
What is the NSN for 86-22-TRDN?
86-22-TRDN is cataloged in the U.S. Government catalog under NSN 5340-00-823-5165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86-22-TRDN

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.