PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86 00 51
86 00 51 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESUSCITATOR,HAND-POWERED is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: RESUSCITATOR,HAND-POWERED CHILD SIZE; STANDARD COMPONENTS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-0459, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86 00 51
NSN: 5315-00-248-0459
FSC: 5315
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
general_characteristics_item_descriptionCHILD SIZE; STANDARD COMPONENTS: BAG 500 M1; PATIENT VALVE W/PRESS. REG; FACE MASK SIZE 0/1; 2 AND 3; AIRWAYS SIZE 0,1 AND 2; RESERVOIR BAG 2600 M1; RESERVOIR VALVE; SILICONE RESUSCITATORS.
part_name_assigned_by_controlling_agencyRESUSCITATOR,HAND-POWERED CHILD SIZE; STANDARD COMPONENTS
NSN5315-00-248-0459
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 86 00 51 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN HEAD DIAMETER: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
HEAD STYLE: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
•
HEIGHT: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.157 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
CHAMFER LENGTH: 0.016 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN HEAD DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
HEAD STYLEPAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
HEIGHT0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.157 INCHES NOMINAL IN
UNDER HEAD LENGTH0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
CHAMFER LENGTH0.016 INCHES MAXIMUM IN
DIAMETER0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
86005133Interchangeable
interchangeable cross-reference
interchangeable
86 00 51Interchangeable
interchangeable cross-reference
interchangeable
86 00 01Interchangeable
interchangeable cross-reference
interchangeable
5450E9159Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86 00 51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86 00 51?
86 00 51 is a RESUSCITATOR,HAND-POWERED.
What parts can replace 86 00 51?
There are 4 known substitutes for 86 00 51: 86005133, 86 00 51, 86 00 01 and 1 more. Substitute compatibility should be verified for your specific system.
Is 86 00 51 still available?
86 00 51 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86 00 51

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026