PartsTable
Technical Data Sheet
Download PDF

859629 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

859629: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE SEAL, bore_diameter: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, outer_ring_width: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-069-2768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
859629
NSN: 3110-01-069-2768
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 36378 — RAYTHEON TECHNICAL SERVICES COMPANY (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE SEAL
bore_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
special_features80 PCT FULL OF SPECIFIED LUBRICANT,HEAT STABILIZED FOR CONTINUOUS OPERATION AT 250 DEG F,ALL EXTERNAL SURFACES EXCEPT BORE AND SEAL RETAINERS CADMIUM PLATED PER QQ-P-416,TYPE 1,CLASS 2 DEGF
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
material_document_and_classificationAMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL
NSN3110-01-069-2768
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 859629 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE INNER RING
OVERALL OUTSIDE DIAMETER1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 4
MS21428-39Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MB539DD FS464Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MB539DDReference document
Same NSN cross-reference
Reference document — Secondary reference
3110PL1195797Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 859629?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 859629?
859629 is a BEARING,BALL,AIRFRAME.
What parts can replace 859629?
There are 4 known substitutes for 859629: MS21428-39, MB539DD FS464, MB539DD and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 859629?
859629 is cataloged in the U.S. Government catalog under NSN 3110-01-069-2768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 859629