PartsTable
Technical Data Sheet
Download PDF

8587448-3 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8587448-3: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.154 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 BAND, overall_width: 0.312 INCHES NOMINAL IN, style_designator: CENTER MOUNT, material_thickness: 0.040 INCHES NOMINAL IN, nominal_thread_size: 0.138 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-171-0757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8587448-3
NSN: 5340-00-171-0757
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
diameter0.154 INCHES NOMINAL IN
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 BAND
overall_width0.312 INCHES NOMINAL IN
style_designatorCENTER MOUNT
material_thickness0.040 INCHES NOMINAL IN
nominal_thread_size0.138 INCHES IN
loop_inside_diameter2.020 INCHES NOMINAL IN
thread_quantity_per_inch40
material_document_and_classificationQQ-S-766 FED SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end1.520 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.313 INCHES NOMINAL IN
NSN5340-00-171-0757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8587448-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC ALL MATERIAL RESPONSES BAND
•
DIAMETER: 0.154 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.520 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD QUANTITY PER INCH: 40
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC ALL MATERIAL RESPONSES BAND
DIAMETER0.154 INCHES NOMINAL IN
OVERALL WIDTH0.312 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.520 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.138 INCHES IN
THREAD QUANTITY PER INCH40
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.313 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8587448-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8587448-3?
8587448-3 is a CLAMP,LOOP.
What is the NSN for 8587448-3?
8587448-3 is cataloged in the U.S. Government catalog under NSN 5340-00-171-0757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8587448-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.