PartsTable
Technical Data Sheet
Download PDF

8577006 — STOP,MECHANICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8577006: STOP,MECHANICAL.

The STOP,MECHANICAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, design_type: FLANGE, thread_class: 2B, mounting_hole_type: THREADED, nominal_thread_size: 0.500 INCHES IN, mounting_hole_diameter: 0.53 INCHES MINIMUM AND 0.59 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-647-1325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8577006
NSN: 5340-01-647-1325
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
design_typeFLANGE
thread_class2B
mounting_hole_typeTHREADED
nominal_thread_size0.500 INCHES IN
mounting_hole_diameter0.53 INCHES MINIMUM AND 0.59 INCHES MAXIMUM IN
mounting_hole_quantity2
end_item_identificationSHIPALT 4822KP-SSN 23 ANCHOR ASSEMBLY
thread_quantity_per_inch13
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
material_document_and_classificationASTM A276 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencySHAFT STOP
NSN5340-01-647-1325
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8577006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
DESIGN TYPE: FLANGE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.53 INCHES MINIMUM AND 0.59 INCHES MAXIMUM IN
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
DESIGN TYPEFLANGE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A276 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.53 INCHES MINIMUM AND 0.59 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.500 INCHES IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSHAFT STOP
THREAD CLASS2B
END ITEM IDENTIFICATIONSHIPALT 4822KP-SSN 23 ANCHOR ASSEMBLY
THREAD QUANTITY PER INCH13
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
581-8577006 ITEM NO 1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8577006-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8577006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8577006?
8577006 is a STOP,MECHANICAL.
What parts can replace 8577006?
There are 2 known substitutes for 8577006: 581-8577006 ITEM NO 1, 8577006-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 8577006?
8577006 is cataloged in the U.S. Government catalog under NSN 5340-01-647-1325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8577006