PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 856226
856226 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 1.125 INCHES NOMINAL IN, first_leg_length: 1.070 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2891, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
856226
NSN: 5340-00-598-2891
FSC: 5340
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width1.125 INCHES NOMINAL IN
first_leg_length1.070 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width1.125 INCHES NOMINAL IN
special_featuresSECOND LEG CHAMFER 30 DEGREES WITH A SLOT IN CENTER 0.531 IN. DEEP 0.375 IN. WIDE IN
style_designatorANGLE
second_leg_length1.688 INCHES NOMINAL IN
first_leg_thickness0.164 INCHES NOMINAL IN
first_leg_end_radius0.562 INCHES NOMINAL IN
NSN5340-00-598-2891
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 856226 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PIN
•
SURFACE TREATMENT: ZINC OR CADMIUM
•
MATERIAL: STEEL
•
STOCK DIAMETER: 0.020 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 0.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORPIN
SURFACE TREATMENTZINC OR CADMIUM
MATERIALSTEEL
OVERALL HEIGHT0.250 INCHES NOMINAL IN
STOCK DIAMETER0.020 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
WIDTH0.063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
7349071Upgraded Successor
successor cross-reference
successor
856226Upgraded Successor
successor cross-reference
successor
22027Interchangeable
interchangeable cross-reference
interchangeable
22027-01Interchangeable
interchangeable cross-reference
interchangeable
RS5X000B22001FInterchangeable
interchangeable cross-reference
interchangeable
308-0241-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 856226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 856226?
856226 is a CLIP,RETAINING.
What parts can replace 856226?
There are 10 known substitutes for 856226: 7349071, 856226, 22027 and 7 more. Substitute compatibility should be verified for your specific system.
Is 856226 still available?
856226 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 856226

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026