PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 85601900-01
85601900-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, thread_class: 2A A, overall_length: 4.250 INCHES NOMINAL IN, handle_clearance: 1.220 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, nominal_thread_size: 0.312 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-058-4858, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
85601900-01
NSN: 5340-01-058-4858
FSC: 5340
CAGE: 27963 — GENERAL DYNAMICS INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
thread_class2A A
overall_length4.250 INCHES NOMINAL IN
handle_clearance1.220 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.312 INCHES IN
mounting_facility_length0.840 INCHES NOMINAL IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN
NSN5340-01-058-4858
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 85601900-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY LENGTH: 0.840 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY LENGTH0.840 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
OVERALL LENGTH4.250 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
MILE1Interchangeable
interchangeable cross-reference
interchangeable
874Interchangeable
interchangeable cross-reference
interchangeable
AS6018Interchangeable
interchangeable cross-reference
interchangeable
10Interchangeable
interchangeable cross-reference
interchangeable
10A68-2330Interchangeable
interchangeable cross-reference
interchangeable
FD65Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 85601900-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 85601900-01?
85601900-01 is a HANDLE,BOW.
What parts can replace 85601900-01?
There are 15 known substitutes for 85601900-01: MILE1, 874, AS6018 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 85601900-01?
85601900-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-058-4858. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 85601900-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026