PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 855013-1
855013-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, overall_length: 15.250 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), handle_clearance: 2.625 INCHES NOMINAL IN, style_designator: ROUND, surface_treatment: ANODIZE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-209-0935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
855013-1
NSN: 5340-01-209-0935
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
overall_length15.250 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
handle_clearance2.625 INCHES NOMINAL IN
style_designatorROUND
surface_treatmentANODIZE OVERALL
material_document_and_classificationQQ-A-225/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length14.500 INCHES NOMINAL IN
NSN5340-01-209-0935
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 855013-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE OVERALL
•
STYLE DESIGNATOR: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
•
MOUNTING METHOD: THREADED HOLE(S)
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 14.500 INCHES NOMINAL IN
•
HANDLE CLEARANCE: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE OVERALL
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
MOUNTING METHODTHREADED HOLE(S)
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH14.500 INCHES NOMINAL IN
HANDLE CLEARANCE2.625 INCHES NOMINAL IN
OVERALL LENGTH15.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
H8629PC33Interchangeable
interchangeable cross-reference
interchangeable
NT4054PC3Interchangeable
interchangeable cross-reference
interchangeable
180004Interchangeable
interchangeable cross-reference
interchangeable
855013Interchangeable
interchangeable cross-reference
interchangeable
7373645Interchangeable
interchangeable cross-reference
interchangeable
154826Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 855013-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 855013-1?
855013-1 is a HANDLE,BOW.
What parts can replace 855013-1?
There are 6 known substitutes for 855013-1: H8629PC33, NT4054PC3, 180004 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 855013-1?
855013-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-209-0935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 855013-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026