PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 855006
855006 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PULLEY,GROOVE is a the manufacturer industrial component. Key specifications include special_features: 1 OUNCE; 3-10MM OZ, end_item_identification: FILTER MEDIA ASSY VMT 1200/2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-238-0881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
855006
NSN: 5315-00-238-0881
FSC: 5315
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
special_features1 OUNCE; 3-10MM OZ
end_item_identificationFILTER MEDIA ASSY VMT 1200/2
NSN5315-00-238-0881
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 855006 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.125 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.4960 INCHES MINIMUM AND 0.4970 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
PIN OVERALL LENGTH1.125 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.4960 INCHES MINIMUM AND 0.4970 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
51078Interchangeable
interchangeable cross-reference
interchangeable
15250Interchangeable
interchangeable cross-reference
interchangeable
855006Interchangeable
interchangeable cross-reference
interchangeable
33-0123Interchangeable
interchangeable cross-reference
interchangeable
MB2CVRASMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 855006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 855006?
855006 is a PULLEY,GROOVE.
What parts can replace 855006?
There are 5 known substitutes for 855006: 51078, 15250, 855006 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 855006?
855006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-238-0881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 855006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026