PartsTable
Technical Data Sheet
PartsTable / MRO / 853725
853725 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RECORDER-REPRODUCER SUBASSEMBLY,. Key specifications include bore_diameter: 1.2500 INCHES NOMINAL IN, alignment_type: RIGID, special_features: MARINE OUTBOARD ENGINE,CHOKE LEVER, overall_outside_diameter: 1.7500 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS, part_name_assigned_by_controlling_agency: LEVER,MANUAL CONTROL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3316, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 853725
NSN: 3110-00-120-3316
FSC: 3110
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
bore_diameter1.2500 INCHES NOMINAL IN
alignment_typeRIGID
special_featuresMARINE OUTBOARD ENGINE,CHOKE LEVER
overall_outside_diameter1.7500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
part_name_assigned_by_controlling_agencyLEVER,MANUAL CONTROL
NSN3110-00-120-3316
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 853725 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.7500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER1.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.7500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
5905001048363Interchangeable
interchangeable cross-reference
interchangeable
R25820JInterchangeable
interchangeable cross-reference
interchangeable
20-2820Interchangeable
interchangeable cross-reference
interchangeable
1SE2075Interchangeable
interchangeable cross-reference
interchangeable
J7235Interchangeable
interchangeable cross-reference
interchangeable
380051023Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 853725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 853725?
853725 is a RECORDER-REPRODUCER SUBASSEMBLY,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 853725?
There are 27 known substitutes for 853725: 5905001048363, R25820J, 20-2820 and 24 more. Substitute compatibility should be verified for your specific system.
Is 853725 still available?
853725 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 853725

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026