PartsTable
Technical Data Sheet
Download PDF

8532205-1 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8532205-1: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.838 INCHES NOMINAL IN, material: STEEL STANDOFF, thread_class: 2A RIGHT EXTERNAL A, thread_length: 0.438 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN, flange_thickness: 0.260 INCHES NOMINAL IN, style_designator: FLANGED WITH LEFT INTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-967-4054, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8532205-1
NSN: 5340-00-967-4054
FSC: 5340 — Hardware, Commercial
CAGE: 02734 — LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AEROSTRUCTURES DIV ADVANCED TECHNOLOGY LABORATORIES (USA)
SPECIFICATIONS
length0.838 INCHES NOMINAL IN
materialSTEEL STANDOFF
thread_class2A RIGHT EXTERNAL A
thread_length0.438 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
flange_thickness0.260 INCHES NOMINAL IN
style_designatorFLANGED WITH LEFT INTERNAL THREAD
thread_directionRIGHT-HAND RIGHT EXTERNAL
surface_treatmentCADMIUM STANDOFF
width_across_flats0.187 INCHES NOMINAL IN
nominal_thread_size0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeHEXAGON
thread_quantity_per_inch40 RIGHT EXTERNAL
NSN5340-00-967-4054
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8532205-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL IN
•
LENGTH: 0.838 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.260 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: FLANGED WITH LEFT INTERNAL THREAD
•
THREAD DIRECTION: RIGHT-HAND RIGHT EXTERNAL
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.187 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.187 INCHES NOMINAL IN
LENGTH0.838 INCHES NOMINAL IN
FLANGE THICKNESS0.260 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
THREAD LENGTH0.350 INCHES NOMINAL RIGHT EXTERNAL IN
STYLE DESIGNATORFLANGED WITH LEFT INTERNAL THREAD
THREAD DIRECTIONRIGHT-HAND RIGHT EXTERNAL
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.112 INCHES RIGHT EXTERNAL IN
SUBSTITUTES & CROSS-REFERENCES 3
200875-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
003-009062-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
0075795Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8532205-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8532205-1?
8532205-1 is a STANDOFF,THREADED,SPACING.
What parts can replace 8532205-1?
There are 3 known substitutes for 8532205-1: 200875-1, 003-009062-001, 0075795. Substitute compatibility should be verified for your specific system.
What is the NSN for 8532205-1?
8532205-1 is cataloged in the U.S. Government catalog under NSN 5340-00-967-4054. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8532205-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.