PartsTable
Technical Data Sheet
Download PDF

8531-503-136VM — DISK,VALVE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

8531-503-136VM: DISK,VALVE.

The DISK,VALVE is a the manufacturer industrial component. Key specifications include material: STEEL, seat_angle: 10.0 DEGREES NOMINAL, overall_height: 3.250 INCHES NOMINAL IN, pressure_rating: 150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS, style_designator: SOLID WEDGE, reference_number_differentiating_characteristics: MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-342-4264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8531-503-136VM
NSN: 4820-01-342-4264
FSC: 4820 — Valves, Nonpowered
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL
seat_angle10.0 DEGREES NOMINAL
overall_height3.250 INCHES NOMINAL IN
pressure_rating150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
style_designatorSOLID WEDGE
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
NSN4820-01-342-4264
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 8531-503-136VM · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRESSURE RATING: 150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
•
STYLE DESIGNATOR: SOLID WEDGE
•
SEAT ANGLE: 10.0 DEGREES NOMINAL
•
MATERIAL: STEEL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT3.250 INCHES NOMINAL IN
PRESSURE RATING150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
STYLE DESIGNATORSOLID WEDGE
SEAT ANGLE10.0 DEGREES NOMINAL
MATERIALSTEEL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
SUBSTITUTES & CROSS-REFERENCES 1
8531-503-136Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8531-503-136VM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8531-503-136VM?
8531-503-136VM is a DISK,VALVE.
What parts can replace 8531-503-136VM?
There is 1 known substitute for 8531-503-136VM: 8531-503-136. Substitute compatibility should be verified for your specific system.
What is the NSN for 8531-503-136VM?
8531-503-136VM is cataloged in the U.S. Government catalog under NSN 4820-01-342-4264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8531-503-136VM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.