PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 852730
852730 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SWIVEL JOINT,HYDRAULIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, leg_length: 2.360 INCHES NOMINAL FIRST END IN, seat_angle: 30.0 DEGREES SECOND END, bearing_type: SLEEVE, NONREMOVABLE, thread_class: 2A FIRST END A, connection_type: THREADED EXTERNAL TUBE FIRST END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-261-7367, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
852730
NSN: 5310-00-261-7367
FSC: 5310
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
leg_length2.360 INCHES NOMINAL FIRST END IN
seat_angle30.0 DEGREES SECOND END
bearing_typeSLEEVE, NONREMOVABLE
thread_class2A FIRST END A
connection_typeTHREADED EXTERNAL TUBE FIRST END
connection_styleSWIVEL NUT INVERTED FLARE (TUBE) SECOND END
special_featuresSYNTHETIC RUBBE BUNA-N SEALS
style_designatorSINGLE JOINT, ELBOW DESIGN
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.750 INCHES SECOND END IN
maximum_operating_temp250.0 FAHRENHEIT SINGLE RESPONSE DEGF
NSN5310-00-261-7367
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 852730 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 1.142 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.827 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER1.142 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
OUTSIDE DIAMETER1.827 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
655116Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
44123Interchangeable
interchangeable cross-reference
interchangeable
505-6848-002Interchangeable
interchangeable cross-reference
interchangeable
1138-1Interchangeable
interchangeable cross-reference
interchangeable
350700193Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 852730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 852730?
852730 is a SWIVEL JOINT,HYDRAULIC.
What parts can replace 852730?
There are 14 known substitutes for 852730: 655116, 1340, 44123 and 11 more. Substitute compatibility should be verified for your specific system.
Is 852730 still available?
852730 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 852730

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026