Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, temp_rating: -67.0 FAHRENHEIT AND 257.0 FAHRENHEIT DEGF, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN, overall_length: 1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-570-5097, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
8526202
NSN:5330-00-570-5097 FSC:5330 CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR OVERALL
temp_rating
-67.0 FAHRENHEIT AND 257.0 FAHRENHEIT DEGF
hole_diameter
0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
overall_length
1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
hardness_rating
60.0 SHORE DUROMETER A NOMINAL OVERALL
style_designator
NON-CIRCULAR
aperture_diameter
1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
bolt_hole_quantity
4
outside_corner_radius
0.188 INCHES NOMINAL IN
maximum_pressure_rating
30.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness
0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
NSN
5330-00-570-5097
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
APERTURE DIAMETER: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.188 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
MATERIAL
RUBBER CHLOROPRENE CLASS CR OVERALL
APERTURE DIAMETER
1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS
0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
0.188 INCHES NOMINAL IN
HARDNESS RATING
60.0 SHORE DUROMETER A NOMINAL OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER
0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH
1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8526202?
8526202 is a GASKET.
What parts can replace 8526202?
There are 8 known substitutes for 8526202: 104045022, 25KP251, 371-8374-080 and 5 more. Substitute compatibility should be verified for your specific system.
Is 8526202 still available?
8526202 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.