PartsTable
Technical Data Sheet
Download PDF

852151 — OSCILLATOR,NONCRYSTAL CONTROLLED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

852151: OSCILLATOR,NONCRYSTAL CONTROLLED.

OSCILLATOR,NONCRYSTAL CONTROLLED. Key specifications include length: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, overall_width: 0.498 INCHES NOMINAL IN, inclosure_type: ENCASED, overall_height: 0.250 INCHES NOMINAL IN, overall_length: 0.870 INCHES NOMINAL IN, style_designator: LEFT INTERNAL AND RIGHT INTERNAL THREADS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-827-9780, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
852151
NSN: 5340-00-827-9780
NIINs: 008279780, 014323301, 016431984
FSC: 5340 — Hardware, Commercial
CAGE: DG438 — SEMIC RF ELECTRONIC GMBH (DEU)
SPECIFICATIONS
length0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
overall_width0.498 INCHES NOMINAL IN
inclosure_typeENCASED
overall_height0.250 INCHES NOMINAL IN
overall_length0.870 INCHES NOMINAL IN
style_designatorLEFT INTERNAL AND RIGHT INTERNAL THREADS
basic_shape_styleRECTANGULAR OR SQUARE
width_across_flats0.250 INCHES NOMINAL IN
installation_designMODULE
cross-sectional_shapeHEXAGON
functional_descriptionOSCILLATOR HYBRID FIXED FREQUENCY540.0 MHZ RF MHz
end_item_identificationARTU/DMU ALQ135 LOT 7
NSN5340-00-827-9780
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 852151 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
LENGTH0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT INTERNAL THREADS
CROSS-SECTIONAL SHAPEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 3
703-034-404Reference document
Same NSN cross-reference
Reference document — Secondary reference
60585Reference document
Same NSN cross-reference
Reference document — Secondary reference
8211A0440-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 852151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 852151?
852151 is a OSCILLATOR,NONCRYSTAL CONTROLLED.
What parts can replace 852151?
There are 3 known substitutes for 852151: 703-034-404, 60585, 8211A0440-16. Substitute compatibility should be verified for your specific system.
What is the NSN for 852151?
852151 is cataloged in the U.S. Government catalog under NSN 5340-00-827-9780. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 852151