PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 85095PC14
85095PC14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 6.375 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 5.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
85095PC14
NSN: 5330-00-154-7418
FSC: 5330
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter6.375 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter5.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-7418
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 85095PC14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 6.375 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 5.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER6.375 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER5.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
6SDVC-01Interchangeable
interchangeable cross-reference
interchangeable
292-6Interchangeable
interchangeable cross-reference
interchangeable
227497Interchangeable
interchangeable cross-reference
interchangeable
16285-191Interchangeable
interchangeable cross-reference
interchangeable
1-108-1Interchangeable
interchangeable cross-reference
interchangeable
UG335UInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 85095PC14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 85095PC14?
85095PC14 is a SEAL,PLAIN ENCASED.
What parts can replace 85095PC14?
There are 25 known substitutes for 85095PC14: 6SDVC-01, 292-6, 227497 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 85095PC14?
85095PC14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 85095PC14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026