PartsTable
Technical Data Sheet
PartsTable / MRO / 8505
8505 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,VOLTAGE SENSITIVE is a the manufacturer industrial component. Key specifications include end_item_identification: AN/SYQ-19 TPSA, part_name_assigned_by_controlling_agency: CARPROFEN TABLETS 100MG CHEWABLE FOR DOGS ONLY 60S BT.. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3542, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 8505
NSN: 3110-00-156-3542
FSC: 3110
CAGE: 556A6 — LINDE MATERIAL HANDLING NORTH AMERICA CORPORATION (USA)
SPECIFICATIONS
end_item_identificationAN/SYQ-19 TPSA
part_name_assigned_by_controlling_agencyCARPROFEN TABLETS 100MG CHEWABLE FOR DOGS ONLY 60S BT.
NSN3110-00-156-3542
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 8505 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
SEAL QUANTITY: 1
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INNER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
SEAL QUANTITY1
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INNER RING WIDTH0.6250 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
8505X12Interchangeable
interchangeable cross-reference
interchangeable
PGF9817-8Interchangeable
interchangeable cross-reference
interchangeable
423296Interchangeable
interchangeable cross-reference
interchangeable
P20Interchangeable
interchangeable cross-reference
interchangeable
A77GInterchangeable
interchangeable cross-reference
interchangeable
506202Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8505?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8505?
8505 is a RESISTOR,VOLTAGE SENSITIVE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8505?
There are 28 known substitutes for 8505: 8505X12, PGF9817-8, 423296 and 25 more. Substitute compatibility should be verified for your specific system.
Is 8505 still available?
8505 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8505

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026