PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8500050
8500050 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include outside_diameter: 0.375 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-0382, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8500050
NSN: 5310-00-012-0382
FSC: 5310
CAGE: 44940 — CUMMINS POWER GENERATION INC. (USA)
SPECIFICATIONS
outside_diameter0.375 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
NSN5310-00-012-0382
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8500050 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A CLASS AND 2 STYLE
•
MATERIAL THICKNESS: 0.094 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
OUTSIDE DIAMETER: 0.688 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.382 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL
NONDEFINITIVE SPEC/STD DATAA CLASS AND 2 STYLE
MATERIAL THICKNESS0.094 INCHES NOMINAL IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
OUTSIDE DIAMETER0.688 INCHES MAXIMUM IN
HOLE DIAMETER0.382 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
2N2979Interchangeable
interchangeable cross-reference
interchangeable
0.5M7.5AZ2Interchangeable
interchangeable cross-reference
interchangeable
HP09476Interchangeable
interchangeable cross-reference
interchangeable
102768Interchangeable
interchangeable cross-reference
interchangeable
AW-924Interchangeable
interchangeable cross-reference
interchangeable
P-551Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8500050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8500050?
8500050 is a WASHER,LOCK.
What parts can replace 8500050?
There are 28 known substitutes for 8500050: 2N2979, 0.5M7.5AZ2, HP09476 and 25 more. Substitute compatibility should be verified for your specific system.
Is 8500050 still available?
8500050 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8500050

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026