PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 85-6490

85-6490 — Storage Datasheet

✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

PIN ASSEMBLY,RIBBON SHIELD LATCH. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_style: HAND LOOP BOTH ENDS, design_type: CLOSED, hook_radius: 0.063 INCHES NOMINAL BOTH ENDS IN, coil_quantity: 18, inside_diameter: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5360-00-633-0467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 85-6490
NSN: 5360-00-633-0467
FSC: 5360
CAGE: 07843 — BOGEN COMMUNICATIONS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
end_styleHAND LOOP BOTH ENDS
design_typeCLOSED
hook_radius0.063 INCHES NOMINAL BOTH ENDS IN
coil_quantity18
inside_diameter0.094 INCHES NOMINAL IN
style_designatorCYLINDRICAL
surface_treatmentPASSIVATE OVERALL
spring_free_length1.438 INCHES NOMINAL IN
coil_helix_directionLEFT-HAND
end_item_identificationPRINTER MODEL 1403N1
spring_free_outside_diameter0.125 INCHES NOMINAL IN
NSN5360-00-633-0467
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 85-6490 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 85-6490 MFR OEM
KEY FEATURES
•
END STYLE: HAND LOOP BOTH ENDS
•
SPRING FREE LENGTH: 1.438 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.094 INCHES NOMINAL IN
•
HOOK RADIUS: 0.063 INCHES NOMINAL BOTH ENDS IN
•
COIL QUANTITY: 18
•
SPRING FREE OUTSIDE DIAMETER: 0.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
STYLE DESIGNATOR: CYLINDRICAL
TECHNICAL CHARACTERISTICS (FLIS)
END STYLEHAND LOOP BOTH ENDS
SPRING FREE LENGTH1.438 INCHES NOMINAL IN
INSIDE DIAMETER0.094 INCHES NOMINAL IN
HOOK RADIUS0.063 INCHES NOMINAL BOTH ENDS IN
COIL QUANTITY18
SPRING FREE OUTSIDE DIAMETER0.125 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORCYLINDRICAL
COIL HELIX DIRECTIONLEFT-HAND
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
856490Interchangeable
interchangeable cross-reference
interchangeable
LA516-146Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 85-6490?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 85-6490?
85-6490 is a PIN ASSEMBLY,RIBBON SHIELD LATCH. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 85-6490?
There are 2 known substitutes for 85-6490: 856490, LA516-146. Substitute compatibility should be verified for your specific system.
What is the NSN for 85-6490?
85-6490 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5360-00-633-0467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 85-6490

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: August 2026