PartsTable
Technical Data Sheet
PartsTable / MRO / 85-6410
85-6410 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL HOLE/SLOT MOUNTED, bore_style: W/ KEYWAY BOTH ENDS, teeth_type: SINGLE HELIX, tooth_form: STANDARD, body_length: 0.450 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3020-00-495-2594, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 85-6410
NSN: 3020-00-495-2594
FSC: 3020
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL HOLE/SLOT MOUNTED
bore_styleW/ KEYWAY BOTH ENDS
teeth_typeSINGLE HELIX
tooth_formSTANDARD
body_length0.450 INCHES MAXIMUM IN
helix_angle36.5000 DEGREES
shaft_styleROUND
shaft_length1.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.250 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
NSN3020-00-495-2594
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 85-6410 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
TEETH QUANTITY: 48
•
PITCH DIAMETER: 6.0000 INCHES NOMINAL IN
•
END NOMINAL LENGTH: 0.255 INCHES FIRST END IN
•
TOOTH FORM: STANDARD
•
TOOTH DIRECTION: RIGHT
•
BODY STYLE: WEBBED, OFFSET, SOLID
•
HUB STYLE DESIGNATOR: 1 STEP FIRST END
•
BORE NOMINAL DIAMETER: 1.000 INCHES BOTH ENDS IN
TECHNICAL CHARACTERISTICS (FLIS)
TEETH QUANTITY48
PITCH DIAMETER6.0000 INCHES NOMINAL IN
END NOMINAL LENGTH0.255 INCHES FIRST END IN
TOOTH FORMSTANDARD
TOOTH DIRECTIONRIGHT
BODY STYLEWEBBED, OFFSET, SOLID
HUB STYLE DESIGNATOR1 STEP FIRST END
BORE NOMINAL DIAMETER1.000 INCHES BOTH ENDS IN
PRESSURE ANGLE14.5000 DEGREES
FIRST STEP NOMINAL LENGTH0.054 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
21655Interchangeable
interchangeable cross-reference
interchangeable
G04-041Interchangeable
interchangeable cross-reference
interchangeable
323B-28Interchangeable
interchangeable cross-reference
interchangeable
158WS217Interchangeable
interchangeable cross-reference
interchangeable
15AWInterchangeable
interchangeable cross-reference
interchangeable
85-6410Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 85-6410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 85-6410?
85-6410 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 85-6410?
There are 15 known substitutes for 85-6410: 21655, G04-041, 323B-28 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 85-6410?
85-6410 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3020-00-495-2594. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 85-6410

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026