PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 85-26-02
85-26-02 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: PAPER AND GLUE OVERALL, body_style: STRAIGHT EDGE TYPE W/CARD GUIDE, head_style: PAN, head_height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-3867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
85-26-02
NSN: 5330-00-215-3867
FSC: 5330
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
body_styleSTRAIGHT EDGE TYPE W/CARD GUIDE
head_stylePAN
head_height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.320 INCHES MAXIMUM IN
terminal_typePIN SINGLE MATING END SINGLE CONTACT GROUPING
thread_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
aperture_width0.625 INCHES NOMINAL IN
overall_height1.452 INCHES NOMINAL IN
NSN5330-00-215-3867
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 85-26-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER AND GLUE OVERALL
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPAPER AND GLUE OVERALL
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
OVERALL WIDTH1.188 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE WIDTH0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
119639Interchangeable
interchangeable cross-reference
interchangeable
710860-43Interchangeable
interchangeable cross-reference
interchangeable
8423Interchangeable
interchangeable cross-reference
interchangeable
24-315Interchangeable
interchangeable cross-reference
interchangeable
P2430-015Interchangeable
interchangeable cross-reference
interchangeable
2430-015Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 85-26-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 85-26-02?
85-26-02 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 85-26-02?
There are 21 known substitutes for 85-26-02: 119639, 710860-43, 8423 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 85-26-02?
85-26-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-3867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 85-26-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026