PartsTable / COMPONENT / 84G15
84G15
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, surface_treatment: CADMIUM OR ZINC CASE, housing_bore_diameter: 4.249 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-734-9346, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
84G15
NSN: 5330-00-734-9346 FSC: 5330 CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
material LEATHER SEALING ELEMENT B case_style SQUARE seal_width 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN surface_treatment CADMIUM OR ZINC CASE housing_bore_diameter 4.249 INCHES NOMINAL IN sealing_element_style VERTICAL-ANGULAR accommodated_shaft_diameter 3.125 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-734-9346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 84G15
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
• SEALING ELEMENT STYLE: VERTICAL-ANGULAR
• HOUSING BORE DIAMETER: 4.249 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN CASE STYLE SQUARE SEALING ELEMENT STYLE VERTICAL-ANGULAR MATERIAL STEEL CASE MATERIAL LEATHER SEALING ELEMENT A MATERIAL LEATHER SEALING ELEMENT B HOUSING BORE DIAMETER 4.249 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SURFACE TREATMENT CADMIUM OR ZINC CASE ACCOMMODATED SHAFT DIAMETER 3.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
35016 Interchangeable interchangeable cross-reference
interchangeable
350-16MF Interchangeable interchangeable cross-reference
interchangeable
1655797 Interchangeable interchangeable cross-reference
interchangeable
1655797-8 Interchangeable interchangeable cross-reference
interchangeable
145003-1691 Interchangeable interchangeable cross-reference
interchangeable
DMS 80018B Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 84G15?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 84G15?
84G15 is a SEAL,PLAIN ENCASED.
What parts can replace 84G15?
There are 17 known substitutes for 84G15: 35016, 350-16MF, 1655797 and 14 more. Substitute compatibility should be verified for your specific system.
Is 84G15 still available?
84G15 is currently cancelled.