8494066: CABLE ASSEMBLY,FIBER OPTIC.
The CABLE ASSEMBLY,FIBER OPTIC is a the manufacturer optical transceiver module designed for high-speed data center interconnects. Key specifications include overall_length: 84.00 INCHES IN, part_name_assigned_by_controlling_agency: CABLE ASSEMBLY, FIBER OPTIC. This part is cataloged in the U.S.
Government catalog under NSN 6020-01-722-4957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| overall_length | 84.00 INCHES IN |
| part_name_assigned_by_controlling_agency | CABLE ASSEMBLY, FIBER OPTIC |
| NSN | 6020-01-722-4957 |
| OVERALL LENGTH | 84.00 INCHES IN |
| SPECIAL FEATURES | MARK I/A/W MIL-STD-130 AND SAE-AS81531, CONTRASTING COLOR, CHARACTERS .10" MINIMUM HIGH PRIOR TO SHRINKING (OR .05 MINIMUM HIGH AFTER SHRINKING); MARKER SHALL BE LONGER THAN THE SPECIFIED MARKING, BY A MINIMUM OF 1 CHARACTER WIDTH, ON EACH SIDE OF MARKING; COVER FN 5 WITH FN 6 OVERLAPPING FN 7 BY APPROXIMATELY 0.25-0.50"; USE FN 10 TO BUILD UP CABLE DIAMETER UNDER FN 6 PRIOR TO SHRINKING; WHEN APPLYING HEAT TO THE INSULATION SLEEVING, DO NOT OVERHEAT THE OFCC; THE PROLONGED EXPOSURE OF THE OFCC TO TEMPERATURES ABOVE 160 DEGREES CELSIUS MAY DAMAGE THE OFCC JACKET; DISCONTINUE HEATING OF THE TUBING AND ALLOW THE JACKET TO COOL BEFORE REHEATING IF THE JACKET SHOWS SIGNS OF BUBBLING; USE FN 10 TO BUILD UP CABLE DIAMETER UNDER BACKSHELL / CABLE CLAMP, TO ENSURE PROPER STRAIN RELIEF; AFTER ASSEMBLY THE CABLE SHALL BE TESTED FOR OPTICAL LOSS I/A/W E1A-455-171, FOTP 171); OPTICAL LOSS SHALL NOT EXCEED 1.0DB AT 1310 NANOMETERS DB |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE ASSEMBLY, FIBER OPTIC |
No substitute or cross-reference records for this part.