PartsTable
Technical Data Sheet
Download PDF

8485854-1 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8485854-1: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: ROUND, width: 1.0200 INCHES MINIMUM AND 1.0500 INCHES MAXIMUM IN, material: PLASTIC, thickness: 0.200 INCHES NOMINAL IN, slot_width: 0.2660 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-647-2714, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8485854-1
NSN: 5340-01-647-2714
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeROUND
width1.0200 INCHES MINIMUM AND 1.0500 INCHES MAXIMUM IN
materialPLASTIC
thickness0.200 INCHES NOMINAL IN
slot_width0.2660 INCHES NOMINAL IN
slot_quantity4
thread_directionRIGHT-HAND
small_end_head_angle30.0000 DEGREES NOMINAL
end_item_identificationTOW BAIL BUMPER
NSN5340-01-647-2714
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8485854-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALL END HEAD ANGLE: 30.0000 DEGREES NOMINAL
•
SLOT QUANTITY: 4
•
SHAPE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
COLOR: BLACK
•
WIDTH: 1.0200 INCHES MINIMUM AND 1.0500 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
SMALL END HEAD ANGLE30.0000 DEGREES NOMINAL
SLOT QUANTITY4
SHAPEROUND
THREAD DIRECTIONRIGHT-HAND
COLORBLACK
WIDTH1.0200 INCHES MINIMUM AND 1.0500 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONTOW BAIL BUMPER
MATERIALPLASTIC
SLOT WIDTH0.2660 INCHES NOMINAL IN
THICKNESS0.200 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8485854-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8485854-1?
8485854-1 is a PLATE,MOUNTING.
What is the NSN for 8485854-1?
8485854-1 is cataloged in the U.S. Government catalog under NSN 5340-01-647-2714. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8485854-1