PartsTable
Technical Data Sheet
Download PDF

848454-2 — 848454-2

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

848454-2: 848454-2.

The 848454-2 is a the manufacturer industrial component. Key specifications include fragility_factor: RUGGED, general_characteristics_item_description: SUPPORT PLATE, ANGLE DRIVE, 1.1 RATIO9 5 DEGREES, 1/2 AND 3/4 SQ MALE ADAPTERS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-167-1615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
848454-2
NSN: 5340-01-167-1615
NIINs: 011671615, 013777837
FSC: 5340 — Hardware, Commercial
CAGE: 33747 — KITSAP COMPOSITES INC (USA)
SPECIFICATIONS
fragility_factorRUGGED
general_characteristics_item_descriptionSUPPORT PLATE, ANGLE DRIVE, 1.1 RATIO9 5 DEGREES, 1/2 AND 3/4 SQ MALE ADAPTERS
NSN5340-01-167-1615
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 848454-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
LENGTH: 15.100 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 11.800 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.050 INCHES NOMINAL IN
•
CORNER BEVEL LENGTH: 0.120 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 16.920 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT, SQUARE OR RECTANGULAR RIB REINFORCED
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.500 INCHES NOMINAL IN
LENGTH15.100 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH11.800 INCHES NOMINAL IN
FLANGE THICKNESS0.050 INCHES NOMINAL IN
CORNER BEVEL LENGTH0.120 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH16.920 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
CROSS-SECTIONAL SHAPE STYLEFLAT, SQUARE OR RECTANGULAR RIB REINFORCED
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.500 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
SUBSTITUTES & CROSS-REFERENCES 2
861001100-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5342PL0711361Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 848454-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 848454-2?
848454-2 is a 848454-2.
What parts can replace 848454-2?
There are 2 known substitutes for 848454-2: 861001100-3, 5342PL0711361. Substitute compatibility should be verified for your specific system.
What is the NSN for 848454-2?
848454-2 is cataloged in the U.S. Government catalog under NSN 5340-01-167-1615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 848454-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.