PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 847114
847114 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, overall_height: 0.325 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, features_provided: MONOLITHIC AND W/RESISTOR AND POSITIVE OUTPUTS, inclosure_material: CERAMIC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-428-4678, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
847114
NSN: 5310-00-428-4678
FSC: 5310
CAGE: K1464 — GOODRICH CONTROL SYSTEMS LTD T/A GOODRICH ENGINE CONTROL SYSTEMS (GBR)
SPECIFICATIONS
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
overall_height0.325 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
features_providedMONOLITHIC AND W/RESISTOR AND POSITIVE OUTPUTS
inclosure_materialCERAMIC
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
input_circuit_pattern8 INPUT
inclosure_configurationDUAL-IN-LINE
terminal_surface_treatmentSOLDER
terminal_type_and_quantity16 PRINTED CIRCUIT
NSN5310-00-428-4678
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 847114 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
8500027-14Interchangeable
interchangeable cross-reference
interchangeable
PA60160-1Interchangeable
interchangeable cross-reference
interchangeable
SG1524C/BEAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 847114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 847114?
847114 is a MICROCIRCUIT,DIGITAL.
What parts can replace 847114?
There are 3 known substitutes for 847114: 8500027-14, PA60160-1, SG1524C/BEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 847114?
847114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-428-4678. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 847114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026