PartsTable
Technical Data Sheet
Download PDF

845008A0110-6 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

845008A0110-6: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 RETAINER, construction: TWO-PIECE, outside_diameter: 3.100 INCHES NOMINAL IN, special_features: BOND TOGETHER USING ADHESIVE,SEALANT,SILICONE,RTV,PER MIL-A-46106,AMEND 2,TYPE 2, retainer_thickness: 0.312 INCHES NOMINAL IN, packing_ring_thickness: 0.093 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-247-7525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
845008A0110-6
NSN: 5330-01-247-7525
FSC: 5330 — Packing and Gasket Materials
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
materialSTEEL COMP 304 RETAINER
constructionTWO-PIECE
outside_diameter3.100 INCHES NOMINAL IN
special_featuresBOND TOGETHER USING ADHESIVE,SEALANT,SILICONE,RTV,PER MIL-A-46106,AMEND 2,TYPE 2
retainer_thickness0.312 INCHES NOMINAL IN
packing_ring_thickness0.093 INCHES NOMINAL IN
packing_inside_diameter0.565 INCHES NOMINAL IN
retainer_inside_diameter0.564 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-763,CL 304 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
NSN5330-01-247-7525
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 845008A0110-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING THICKNESS: 0.093 INCHES NOMINAL IN
•
RETAINER INSIDE DIAMETER: 0.564 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN
•
PACKING INSIDE DIAMETER: 0.565 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.100 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SEALING ELEMENT
•
RETAINER THICKNESS: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PACKING RING THICKNESS0.093 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER0.564 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN
PACKING INSIDE DIAMETER0.565 INCHES NOMINAL IN
OUTSIDE DIAMETER3.100 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SEALING ELEMENT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CL 304 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
RETAINER THICKNESS0.312 INCHES NOMINAL IN
SPECIAL FEATURESBOND TOGETHER USING ADHESIVE,SEALANT,SILICONE,RTV,PER MIL-A-46106,AMEND 2,TYPE 2
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT
MATERIALSTEEL COMP 304 RETAINER
SUBSTITUTES & CROSS-REFERENCES 1
845008A0110Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 845008A0110-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 845008A0110-6?
845008A0110-6 is a PACKING WITH RETAINER.
What parts can replace 845008A0110-6?
There is 1 known substitute for 845008A0110-6: 845008A0110. Substitute compatibility should be verified for your specific system.
What is the NSN for 845008A0110-6?
845008A0110-6 is cataloged in the U.S. Government catalog under NSN 5330-01-247-7525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 845008A0110-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.