PartsTable
Technical Data Sheet
Download PDF

8454-67-738-2544 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8454-67-738-2544: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 1.281 INCHES NOMINAL IN, cut_type: DIAGONAL TOP RING, material: COTTON AND RUBBER CHLOROPRENE CLASS CR INNER RING, hardness_rating: 80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM INNER RING, inside_diameter: 3.505 INCHES MINIMUM AND 3.545 INCHES MAXIMUM IN, outside_diameter: 4.205 INCHES MINIMUM AND 4.245 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-489-5559, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8454-67-738-2544
NSN: 5330-01-489-5559
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
height1.281 INCHES NOMINAL IN
cut_typeDIAGONAL TOP RING
materialCOTTON AND RUBBER CHLOROPRENE CLASS CR INNER RING
hardness_rating80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM INNER RING
inside_diameter3.505 INCHES MINIMUM AND 3.545 INCHES MAXIMUM IN
outside_diameter4.205 INCHES MINIMUM AND 4.245 INCHES MAXIMUM IN
special_featuresV-PACKING ASSY 5-RING SET
peripheral_diameter4.205 INCHES MINIMUM AND 4.245 INCHES MAXIMUM IN
center_hole_diameter3.505 INCHES MINIMUM AND 3.545 INCHES MAXIMUM IN
cross-sectional_height0.340 INCHES NOMINAL IN
end_item_identificationFOLLOW UP MECH;LOS ANGELES CLASS SSN (688)
cross-sectional_shape_styleV INNER RING
NSN5330-01-489-5559
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8454-67-738-2544 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.340 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 4.205 INCHES MINIMUM AND 4.245 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM INNER RING
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE TOP RING
•
CUT TYPE: DIAGONAL BOTTOM RING
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.340 INCHES NOMINAL IN
OUTSIDE DIAMETER4.205 INCHES MINIMUM AND 4.245 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM INNER RING
CROSS-SECTIONAL SHAPE STYLEANGLE TOP RING
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
CROSS-SECTIONAL SHAPE STYLEV INNER RING
CUT TYPEDIAGONAL BOTTOM RING
CUT TYPEDIAGONAL TOP RING
PERIPHERAL DIAMETER4.205 INCHES MINIMUM AND 4.245 INCHES MAXIMUM IN
INSIDE DIAMETER3.505 INCHES MINIMUM AND 3.545 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
845-4677382Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
H623-0507-35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2642-850-01-44Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8454-67-738-2544?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8454-67-738-2544?
8454-67-738-2544 is a PACKING ASSEMBLY.
What parts can replace 8454-67-738-2544?
There are 3 known substitutes for 8454-67-738-2544: 845-4677382, H623-0507-35, 2642-850-01-44. Substitute compatibility should be verified for your specific system.
What is the NSN for 8454-67-738-2544?
8454-67-738-2544 is cataloged in the U.S. Government catalog under NSN 5330-01-489-5559. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8454-67-738-2544