PartsTable
Technical Data Sheet
Download PDF

845-1889834PC93 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

845-1889834PC93: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 1.054 INCHES NOMINAL IN, center_hole_diameter: 0.812 INCHES NOMINAL IN, distance_between_ends: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-168-4587, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
845-1889834PC93
NSN: 5330-00-168-4587
FSC: 5330 — Packing and Gasket Materials
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter1.054 INCHES NOMINAL IN
center_hole_diameter0.812 INCHES NOMINAL IN
distance_between_ends0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
cross-sectional_thickness0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
criticality_code_justificationZZZY
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
NSN5330-00-168-4587
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 845-1889834PC93 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 1.054 INCHES NOMINAL IN
•
DISTANCE BETWEEN ENDS: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
PERIPHERAL DIAMETER1.054 INCHES NOMINAL IN
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.812 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT RETAINER
SUBSTITUTES & CROSS-REFERENCES 5
2640-085PC93Reference document
Same NSN cross-reference
Reference document — Secondary reference
845-1889836PC93Reference document
Same NSN cross-reference
Reference document — Secondary reference
127616185Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28782-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
2640-087PC93Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 845-1889834PC93?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 845-1889834PC93?
845-1889834PC93 is a RETAINER,PACKING.
What parts can replace 845-1889834PC93?
There are 5 known substitutes for 845-1889834PC93: 2640-085PC93, 845-1889836PC93, 127616185 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 845-1889834PC93?
845-1889834PC93 is cataloged in the U.S. Government catalog under NSN 5330-00-168-4587. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 845-1889834PC93

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.